Semtech SC2441A
1.8V to 20V Input 2-Phase Synchronous Step-down Controllers with Step-up Converter
The SC2441A is a programmable frequency dual independent or dual/multiple phase single output peak current-mode step-down switching regulator controller. It is capable of operating from 1.8V to 20V input. A 0.6A step-up converter in the SC2441A generates an auxiliary gate drive supply when VIN is below 4.5V.
C-SIM Design Simulation Tool
Create design now
Features
2-Phase Synchronous Step-down Controllers
- 2-Phase Synchronous Continuous Conduction Mode
- Out of Phase Operation for Low Input Current Ripple
- Operates up to 1MHz Per Channel
- Excellent Current Sharing Between Phases
- Duty Cycle Up to 90%
- 0.5V Feedback voltages for Low-Voltage Outputs
- Starts into Pre-biased Outputs
- Adaptive Shoot-through Protection
- Lossless Inductor DCR Current Sensing
- 23mV Current-limit Threshold
- Individual Soft-start, Overload Hiccup and Enable
Step-up Regulator
- 0.27V VCESAT Switch at 0.6A
- Fixed frequency Current-mode Control
Common Features
- Wide input Voltage Range: 1.8V to 20V
- Synchronizing Frequency Equal to that of the Step-down Converters
- 28-lead TSSOP-EDP Lead-free package, fully WEEE and RoHS compliant
Applications
- Low voltage distributed DC-DC converters
- Telecommunication power supplies
- Servers and base stations
Order Codes
- SC2441ATETRT: Lead-Free, RoHS and WEEE Compliant, Package Minimum Tape & Reel Only
|