激光调制器驱动
  • GN1158
  • 1.0 to 11.3Gb/s多速率SR收发器芯片
  • GN1160
  • 1.0 to 11.3Gb/s多速率激光驱动芯片
  • GN1153B/C
  • 11.3 Gbps DFB/FP激光驱动器
  • GN1155
  • 带有集成的限幅放大器的多速率VCSEL驱动器
  • GN1190
  • GN1411
  • 11.3G DML带有集成的限幅放大器
  • GN1412
  • 11.3G DML带有集成的限幅放大器
  • GN7355
  • 单芯片收发器集成了10G EPON和突发模式CDR
Semtech GN1157

Semtech GN1157

1.0 to 11.3Gb/s多速率LR收发器芯片

加入关注列表

The GN1157 is a multi-rate transceiver IC designed specifically for datacom and telecom applications. The transmit DFB/FP laser driver is an advanced design that is focused on delivering excellent optical performance while still achieving low power. Programmable equalisation is available to optimise jitter. The Tx output has programmable rise/fall times to allow optimization for different bit rates. The GN1157 features an integrated automatic power control loop that adjusts bias current to compensate for laser aging and environment change. The GN1157 is compatible with an external microcontroller look-up table to control modulation current and extinction ratio over temperature and life.

Contact your local Sales Representative for full product specifications.

Features


  • Power Dissipation 185mW typical (IBIAS = 0 mA, IMOD = 0mAppd)
  • DFB/FP Laser Driver:
    • Maximum bias current = 120mA
    • Maximum modulation current into 15? differential TOSA = 92mApp
    • Tx DJ = 5pspp; Tx RJ = 0.5psrms
    • Integrated closed-loop Automatic Power Control (APC)
    • Compatible with microcontroller-based modulation current/temperature look-up table
    • Programmable Tx eye shaping features and input equalization
    • Programmable rise/fall times
    • Laser safety features
    • Switchable Tx polarity invert
  • Limiting Amplifier Receiver:
    • Rx sensitivity at 11.317Gb/s = 5mVppd
    • Rx DJ = 4pspp, Rx RJ = 0.7psrms
    • Programmable bandwidth
    • Rx output pre-emphasis and squelch
    • Programmable Rx output swing
    • Programmable rise/fall times
    • Adjustable loss of signal detect threshold
    • Switchable Rx polarity invert
  • Measurement of digital diagnostic and monitoring parameters
  • 2-wire serial interface for host communication
  • Software-selectable power-down modes
  • 3.3V or 2.5V CMOS inputs and open-drain outputs for control and status lines

Applications


  • This specification defines a multi-rate transceiver IC for use in a wide range of LR Ethernet and Fibre Channel applications from 1.0Gb/s to 11.3Gb/s. This includes 1Gb/s and 10Gb/s Ethernet data rates as defined by IEEE 802.3 and 1,2,4,8 and 10Gb/s Fibre Channel data rates.

Order Codes

  • GN1157-INE3
  • GN1157-INTE3Z - Tape and Reel, 2500/reel
 
- Close -
Add Product to Watch List

Please login to the mySemtech member site to add products to your personal Watch List.

If you're not registered for mySemtech, please Register now. mySemtech member benefits include pre-filled forms for quick and easy online ordering, technical support, new product information and more.